Introduction

AlproGel 2000 is a two-component polyurethane elastomer system. On mixing the two components at room temperature, the system cures to form a highly flexible elastomeric material.

Features

• Ambient curable system
• Very good pot life
•  Resilient and flexible
• Water tight seal 
• Good electrical insulation
• Very good abrasion resistance and tear strength
• Excellent scratch and abrasion resistance
• Good chemical, oil and hydrolysis resistance

Applications

• Joint Sealing of optical fibers, cables etc.
• Encapsulation of PCB, electronic equipments etc.
• Sealant

Specifications
Colour and Appearance                   : Slight hazy to clear light colour liquid
Pot life                                              :2 – 3 hrs
Curing time                                       : 8 hrs

Properties
Compressive strength                       : 5 N/mm²
Impact strength                                 : 5 kJ/ m²

Mixing Ratio
Alprogel A : 100
Alprogel B  : 25

Processing Procedure

• Mix ALprogel A and Alprogel B in required ratio ensuring not to introduce air into the mixture
• Pour the mixture into the moulds or in objects.

Packing :       20 Kg.


The information provided here is merely for your information and not to be used for setting specifications. It is offered solely for your consideration. Since, your specific use applications and conditions are beyond the control of Lympro Chem Ind., you must determine the applicability of the product.