Introduction

Lympro’s AquaCease 1416 is a specifically formulated acrylic emulsion to be used with cement/ cement mixtures to provide waterproofing to the structures. AquaCease 1416 improves the performance of cement in plasters, mortar, concrete etc. in terms of water proofing, repair, bonding, setting etc.
AquaCease 1416 is used as cementitious coating for roofs, terraces and walls. The product is applied as a coating.

Features

• Good compatibility with cement and gives an excellent flow properties/slump.
• Excellent adhesion to concrete and old surfaces
• Improves compressive, tensile and flexural strength of cement
• Improves setting time of cement

Mixing ratio:

Cement : 2 parts
AquaCease 1416 : 1 part

Application :

Any cracks, pot holes, joints should be properly sealed with Lympro’s Polyurethane sealant or by a mixture of cement and AquaCease 1416. Clean all foreign matters such as dirt, dust, grease, algae/fungi etc. wash thoroughly with water. Mix cement and  AquaCease 1416 (2:1) thoroughly. Apply by brush, trowel. Moist cure for 24 hrs. and then apply the second coat. The coating can be covered by Koba or plaster.

 

The information provided here is merely for your information and not to be used for setting specifications. It is offered solely for your consideration. Since, your specific use applications and conditions are beyond the control of Lympro Chem Ind., you must determine the applicability of the product.